News Center

How to connect the power supply board of the ironing machine

Release time:

2024-02-23

The wiring of the power board of the ironing machine is very important. The correct wiring can ensure that the ironing machine works normally and is safe and reliable. The following are the wiring steps of the power supply board of the ironing machine:

First of all, make sure that there are several terminals on the power board of the ironing machine. There are usually three terminals, namely, the live wire (L), the neutral wire (N) and the ground wire (E).

2. Strip a certain length of insulation from the live wire (L), neutral wire (N) and ground wire (E) of the power cord to expose a certain length of copper wire.

3. Insert the live wire (L) into the terminal hole marked "L" on the power board to ensure good contact, and then fix the terminal hole with a screwdriver.

4. Insert the neutral wire (N) into the terminal hole marked "N" on the power board, also ensure good contact, and then fix the terminal hole with a screwdriver.

5. Insert the ground wire (E) into the terminal hole marked "E" on the power board, also ensure good contact, and then fix the terminal hole with a screwdriver.

6. Check whether all the wiring is firm, there is no loose or poor contact.

7. Plug in the power plug, turn on the power switch of the ironing machine, check whether the indicator light on the power board is on, and confirm that the power wiring is correct.

8. Finally, the leakage protection test is carried out to ensure the safety and reliability of the ironing machine.

In short, the wiring of the power board needs to be carefully operated to ensure that each wire is in good contact and firmly fixed to avoid short circuits or other safety hazards. If there is anything you don't understand, it is recommended to invite a professional electrician to carry out the wiring operation to ensure safety.